常用材料
氟硅橡膠 FLUOR
Viton®，也被稱為氟橡膠，F(xiàn)PM或FKM，是一種更堅韌的橡膠材料，可用于密封酸、堿性和其他化學物質。這種材料對臭氧、戶外環境和老化非常持久。該材料可獲得UL94 V-0分級，并可承受溫度高達200，峰值為250。
Viton®, also known as fluor rubber, FPM or FKM is one of the tougher rubber materials available for seals for acids, alkalis and other chemical substances. The material is very persistent against ozone, outdoor-environments and aging. The material can be obtained UL94 V-0 graded and withstands temperatures up to 200° with a peak of 250°.
因此，該材料非常適合加熱后的ASTM油的密封，如液壓油和機油。由于該材料可以承受多種化學物質，因此，當汽油、油、酸和堿等物質的密封是非常合適的。我們的模具切割和水刀切割成輥或薄片的氟橡膠60-80SHA，為墊圈和密封件，對技術產品的要求非常高。
Therefore the material is very suitable to seal heated ASTM oils such as hydraulic- and motor oil. Since the material can withstand multiple chemical substances it is very suitable when substances such as gasoline, oils, acids, and alkalis should be sealed. We die-cut and waterjet cut in rolls or sheets of fluor rubber 60-80 shore for gaskets and seals for very high demands in technical products.
如高壓儲罐、燃料電池、電池及電池相關產品等。該材料可以很好地成型為3d形狀的墊片或o型圈。
Such as high pressure tanks, fuel cells, batteries and battery related products. The material can with good results be molded for a 3D-shaped gasket or as an O-ring.
FKM/FPM采用多種硬度成型，以適合和密封選定的產品在低至40-50SHA。這種材料經常用于汽車工業、鋼鐵廠、能源生產和其他高要求的產品中，這些材料會暴露在高溫和多種化學品中。
FKM/FPM is molded in multiple hardnesses to best fit and seal selected products in as low as 40-50 shore. The material is very often used in products within the car industry, steel plants, energy production and other high requiring products where the material is exposed to high temperatures and multiple chemicals.
材料：EPDM, 氯丁橡膠, 丁腈橡膠, SBR,硅膠, 氟橡膠
Materials: EPDM, Chloroprene, Nitrile, SBR, Silicone, Viton®
溫度范圍：-60°C – 275°C
Temperature range: -60°C – 275°C
硬度：40-80sha
Hardness: 40 – 80 sh
防火等級：UL-94
Fire resistance: UL-94